Legal suites, panel upgrades and EV chargers across Calgary — load calc done, permit pulled, and it passes inspection the first time.
Two dates are pulling every basement and backyard suite in the city onto the books. Both make the panel, the load calc and the inspection the job that has to happen first.
Until then, R‑CG lots can hold both a basement and a backyard suite. After, most revert to either‑or — so the homes that want both are filing now, and every one needs its service sized and stamped.
The City is waiving registry fees to bring existing (often unpermitted) suites legal — which means an electrical permit, interconnected smoke/CO alarms and a passed inspection before the clock runs out.
The four things standing between a Calgary homeowner and a legal suite — done in the right order, by the electrician who pulls the permit and meets the inspector on site.
We run the secondary‑suite load calc first — it tells you honestly whether your existing service carries the suite, before a dollar is spent.
If the numbers say so, we upgrade the service (typically to 200A) and coordinate the ENMAX connection — no shared branch circuits between suites.
Hardwired, interconnected smoke and CO alarms wired to code so one trips them all — the requirement that fails the most DIY suites.
We pull the electrical permit, book the rough‑in and final, and meet the inspector — so it passes the first time and the suite goes on the registry.
| Main service | 200A · 240/120V |
| Suite subpanel | 100A feed |
| Kitchen / small‑appl. | 2 × 20A |
| Heat / range | 40A · dedicated |
| Smoke & CO (interconn.) | wired ✓ |
| AFCI / GFCI | per code ✓ |
Level 2 home chargers sized to your panel — with the load headroom checked, not guessed.
SVC‑0160/100A → 200A upgrades and ENMAX coordination for suites, heat pumps and additions.
SVC‑02Dedicated GFCI‑protected feeds and disconnects, wired to code for wet locations.
SVC‑03Pot lights, layered residential lighting and controls, cleanly laid out and dimmable.
SVC‑04Rewires, additions and basement developments planned so the reno passes inspection.
SVC‑05Dead circuits, tripping breakers, aluminum‑wiring concerns — found fast, fixed right.
SVC‑06Pre‑purchase and safety inspections with a clear, honest write‑up — no scare upsell.
SVC‑07Tenant fit‑outs, small‑commercial and light industrial — the same precision, at scale.
SVC‑08
Anyone can pull wire. Parallel bends, tidy panels and labelled circuits are the tell that a Master Electrician touched it — and the reason it passes without a second visit.
Lars came up through a trades family — milling machines, then a decade across residential, commercial and industrial work. That industrial rigour is what a suite panel and a load calc actually want. On a Sparktech job, the person who pulls the permit is the person on your panel.
“Fast, professional, and the job came in exactly at the quote. Genuinely a great experience start to finish.”
“Lars and Cam got our receptacles working again and wired a new kitchen fan — fast, professional, and done for what they quoted.”
Tell us the job — suite, panel, EV or a repair — and Lars gets back to you with a straight answer and a firm quote.
(403) 707‑7557